What is a Boat Draft and How is it Measured?

Preparation is one of the keys for succeeding in any undertaking. If you are going to do something and want to achieve each and every one of your goals in connection with it, then you better be prepared. If success is your ultimate goal, then being prepared is the last thing that you want to ignore. Failure to prepare is definitely equivalent to preparing to fail, as some saying goes. This can be applied to almost anything in life, from personal things that might involve your family, to those that might concern your work and career. Whatever it might be about, being prepared is certainly a must.

Those who are involved or interested in boating understand that they always need to be prepared. Since there are so many things to do and remember when it comes to boating, ample preparation should always be a given. And especially since boating involves some risk, some danger, if there is not enough care during the time that is meant for preparing. If you think how lives could be placed in jeopardy, then it should be enough to make you think and care about things like what is a boat draft and how it can be measured. It might seem like little things to the uninitiated, but these are actually important matters in boating and should be properly prepared for.

Measuring the Boat Draft

First, about the question of what a boat draft is. It is actually a measurement of how far the hull will extend beneath the surface of the water. Needless to say, it is a very important thing in boating and should never be neglected, and the process of measuring it is a real necessity before going off boating anywhere. Knowing the draft of a boat is vital when making decisions, particularly about the actual depth where you can navigate the boat you are riding. The measurement of the draft can only be performed before the boat actually embarks, and not when it is already under way. The following are the steps to measure the draft:

• The first step in measuring the draft is to add the maximum weight that will be carried by the boat. It is important to note that the amount of weight carried by the boat affects the draft. The heavier the cargo, the lower the boat sits in the water, which increases its draft. This is an effective way to ensure the safety of the boat, aside from avoiding shallow waters.

• The next step would be to identify the lowest point of the keel, or the bottom of the boat. However, the keels of various vessels vary from another, which will result in different measurements for the draft.

• For the final step in measuring the draft of a boat, get the distance from the boat’s waterline to the lowest part of the keel that was identified earlier. The distance measured is the actual draft of the boat.